Intel ICH10R, X58 3-5 Advanced BIOS Feature

DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.

S.M.A.R.T.: This option allows you to enable the HDD S.M.A.R.T Capability

(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;

Disabled; and ENABLED.

32 Bit Data Transfer: the optional settings are: Disabled and Enabled.

Floppy A

This item is for specific floppy disk drive settings. Select according to the specification of the

floppy disk you use.

System Memory

This item will show information about the memory modules(s) installed.

3-5 Advanced BIOS Feature

Advanced BIOS Features

Advanced Settings Help Item

WARNING: Setting wrong values in below sections

May cause system to malfunction

CPU Configuration Press Enter

Boot Sector Virus Protection Disabled

Quick Boot Enabled

Boot up Number Lock On

ACPI APIC Support Enabled

Quiet Boot Disabled

Configure CPU

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Discard Changes F6:Fail-Safe Defaults F7:Optimized Defaults

Boot Sector Virus Protection

The selection Allow you to choose the VIRUS Warning

feature for IDE Hard Disk boot sector protection. If this function is enabled and someone

attempt to write data into this area, BIOS will show a warning message on screen and alarm

beep.

Disabled (default) No warning message to appear when anything attempts to access the

boot sector or hard disk partition table.

Enabled Activates automatically when the system boots up causing a warning

message to appear when anything attempts to access the boot sector

of hard disk partition table.

Quick Boot

Allows BIOS to skip certain tests while booting. This will decrease the needed to boot the

system.

Boot Up NumLock Status

The default value is On.

On (default) Keypad is numeric keys.

Off Keypad is arrow keys.

ACPI APIC Support

Include ACPI APIC table pointer to RSDT pointer list.

Quiet Boot

The optional settings are Enabled and Disable.

Disabled: Display normal POST message.

Enabled: Displays OEM logo instead of POST message.