|
| Contents |
| EU RoHS | 71 |
| China RoHS | 72 |
EMC Regulations | 74 | |
| Ensure Electromagnetic Compatibility (EMC) Compliance | 75 |
Product Certifications | 76 | |
| 76 | |
| Chassis and Component Certifications | 77 |
Figures |
| |
1. | Desktop Board DG35EC Components | 11 |
2. | LAN Connector LEDs | 16 |
3. | Location of the +5 V Standby Power Indicator | 22 |
4. | Installing the I/O Shield | 27 |
5. | Desktop Board DG35EC Mounting Screw Hole Locations | 28 |
6. | Lift the Socket Lever | 29 |
7. | Lift the Load Plate | 30 |
8. | Remove the Protective Socket Cover | 30 |
9. | Remove the Processor from the Protective Processor Cover | 31 |
10. | Install the Processor | 31 |
11. | Close the Load Plate | 32 |
12. | Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header | 33 |
13. | Dual Channel Memory Configuration with Two DIMMs | 34 |
14. | Dual Channel Memory Configuration with Four DIMMs | 35 |
15. | Dual Channel Memory Configuration with Three DIMMs | 35 |
16. | Use DDR2 DIMMs | 36 |
17. | Installing a DIMM | 37 |
18. | Installing a PCI Express x16 Card | 39 |
19. | Removing a PCI Express x16 Card | 40 |
20. | Connecting the Diskette Drive Cable | 41 |
21. | Connecting the IDE Cable | 42 |
22. | Connecting a Serial ATA Cable | 43 |
23. | Internal Headers | 44 |
24. | Back Panel Audio Connectors | 48 |
25. | Location of the Chassis Fan Headers | 49 |
26. | Connecting Power Supply Cables | 50 |
27. | Location of the BIOS Configuration Jumper Block | 51 |
28. | Removing the Battery | 57 |
29. | Desktop Board DG35EC China RoHS Material Self Declaration Table | 73 |
vii