Intel MB820 user manual PNP/PCI Configurations, PNP OS Install, Reset Configuration Data

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Install	No	ITEM HELP
Reset Configuration Data	Disabled	Menu Level
Resources Controlled By	Auto (ESCD)	Default is Disabled.
		Select Enabled to
IRQ Resources	Press Enter
		reset Extended
DMA Resources	Press Enter
		System Configuration
		Data (ESCD) when you
PCI/VGA Palette Snoop	Disabled	exit Setup if you have
INT Pin 1 Assignment	Auto	installed a new add-on
		and the system
INT Pin 2 Assignment	Auto
		reconfiguration has
INT Pin 3 Assignment	Auto
		caused such a serious
INT Pin 4 Assignment	Auto
		conflict that the OS
INT Pin 5 Assignment	Auto	cannot boot
INT Pin 6 Assignment	Auto
INT Pin 7 Assignment	Auto
INT Pin 8 Assignment	Auto

PNP OS Install

Enable the PNP OS Install option if it is supported by the operating system installed. The default value is No.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices automatically with the use of a use a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

MB820 User’s Manual 45