INSTALLATIONS
Setting the Jumpers
Jumpers are used on MB879 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MB879 and their respective functions.
Jumper Locations on MB879 | 9 |
JP1: COM4 RS232 +5V / +12V Power Setting | 10 |
JP2: LVDS Panel Voltage Selection | 10 |
JP3: COM3 RS232 +5V / +12V Power Setting | 10 |
JP4: CPU FSB Selection | 10 |
JP5: Clear CMOS Setting | 11 |
SW1: LVDS Resolution Switch Setting | 11 |
IMPORTANT NOTE: When the system boots without the CRT being connected, there will be no image on screen when you insert the CRT/VGA cable. To show the image on screen, the hotkey must be pressed.
8 | MB879 User’s Manual |
