Intel user manual MB879 Specifications, Introduction, MB879 User’s Manual

			INTRODUCTION
	MB879 Specifications
[
	CPU Socket		Socket 479 or FBGA on board
	CPU Supported		Intel Pentium® M / Celeron® M (Dothan core only)
	CPU Voltage		0.700V ~ 1.708V
	CPU Speed / FSB		Up to 2.26GHz / 533MHz FSB
	Green /APM		APM1.2
	Chipset		ATI Radeon Xpress 200 (RC410MD) / SB450 chipset
			NB: ATi Radeon Xpress 200 (RC410MD), 707-ball FCBGA
			SB: ATi SB450, 564-ball BGA
	BIOS		Award BIOS, support ACPI function
	Cache		128K/256K/512K/1M Level 2 (CPU integrated)
	Memory		1x DDR2 400/533/667 socket (single channel, w/o ECC),
			Max.1GB
	VGA		ATi RC410MD built Mobility Radeon 9600 (M10) graphic core.
			Supports DirectX 9.0 and supports CRT, LVDS & TV-out
	LVDS		ATi RC410MD built controller and transmitter, supports 24-bit
			single/dual channels LVDS
	LAN		- Realtek RTL8100C-LF (10/100) LAN controller x1 co-layout w/
			RTL8110S-32-LF Gigabit LAN controller
			- Marvell 88E8052 PCI Express x1 Gigabit LAN	controller
			(option)
	USB		ATi SB450 built-in USB2.0 host controller, supports 6 ports
	Audio		ATi SB450 built-in Audio controller + AC97 Codec ALC655 for 5.1
			CH (Line-out, Line-in & Microphone)
			NS LM4950 (8-ohm 2W stereo audio power amplifier)
	Serial ATA		ATi SB450 built-in SATA host controller, supports 2 ports
	1394		TI TSB43LV22 (dual port)
	Local bus IDE		ATi SB450 built-in two channels Ultra DMA 100/133
			- IDE1: 40 pins box-header; IDE2: Compact Flash
	LPC I/O		ITE IT8712: COM1, COM2 (RS232), IrDA, Floppy, hardware
			monitor (3 thermal inputs, 4 voltage monitor inputs, VID0-5 & 2
			Fan Header). Parallel port not use
	2nd I/O		Fintek F81216D for COM3 / COM4
	Edge Connector		PS/2 Connector x1 for keyboard/mouse
	(same I/O shield w/		Gigabit LAN RJ-45 + dual USB stack connector
	MB896)		10/100 LAN RJ45 + dual USB stack connector
			DB9 & DB15 stack connector x1 for COM 1 and VGA
			RCA Jack x1 +S-Video for TV-Out
			SPDIF/OUT connector x1
			1394 Connector x1
			RCA Jack 3x1 for Audio (Line-Out, Line-In & Mic) – 1U height
	Onboard Headers /		DF13-20 x2 for LVDS
	Connectors		40 pins, 2.54mm, box-header x 1 for IDE1
			5x2 pins pin-header x1 for 2 USB ports
			8 pins pin-header x1 for 1394
			30 pins pin-header x1 for COM2/3/4
			Slim Floppy connector x 1
			5 pins pin-header x 1 for IrDA
	Expansion Slot		PCI slot (32bits/33MHz) x1
			PCI-Express (x1) x1 (align w/ PCI slot); Mini PCI connector x1
	Digital I/O		Supports 4 in, 4 out
	Watchdog Timer		Yes (256 segments, 0, 1, 2…255. sec/min)
	Power Connector		Standard ATX 12V
	System Voltage		+5V, +12V, -12V, 5VSB, -5V & 3.3V
	Other Features		Modem Wakeup, LAN Wakeup
	Board Size		170 x 170mm
		MB879 User’s Manual		3