Intel MB886 Power Management Setup, ACPI Function, ACPI Suspend, RUN VGABIOS if S3 Resume

BIOS SETUP

Power Management Setup

Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Function	Enabled	ITEM HELP
ACPI Suspend	S1(POS)
RUN VGABIOS if S3 Resume	Auto	Menu Level >
Power Management	User Define
Video Off Method	DPMS
Video Off In Suspend	Yes
Suspend Type	Stop Grant
Modem Use IRQ	3
Suspend Mode	Disabled
HDD Power Down	Disabled
Soft-Off by PWR-BTTN	Instant-Off
Wake-Up by PCI Card	Disabled
Power On by Ring	Disabled
Resume by Alarm	Disabled
Date (of Month) Alarm	0
Time (hh:mm:ss) Alarm	0 : 0 : 0
** Reload Global Timer Events **	Disabled
Primary IDE 0
Primary IDE 1	Disabled
Secondary IDE 0	Disabled
Secondary IDE 1	Disabled
FDD, COM, LPT Port	Disabled
PCI PIRQ[A-D] #	Disabled

ACPI Function

Enable this function to support ACPI (Advance Configuration and Power Interface).

ACPI Suspend

The default setting of the ACPI Suspend mode is S1(POS).

RUN VGABIOS if S3 Resume

The default setting of this field is Auto.

Power Management

This field allows you to select the type of power saving management modes. There are four selections for Power Management.

Min. Power Saving	Minimum power management
Max. Power Saving	Maximum power management.
User Define	Each of the ranges is from 1 min. to
	1hr. Except for HDD Power Down
	which ranges from 1 min. to 15 min.

42 MB886 User’s Manual