PX865PE7 PRO/ PX865PE7
35
Soft-Off by PWRBTN
ters a “hung” state, you can configure the BIOS so that you are
e power button for more than 4 seconds before the system enters the Soft-Off state.
Control” label and then press the enter key, it will display a submenu
call to modem device.
ode using a USB keyboard.
t to S3.
de. Options: Enabled、Disabled (default).

rm

only configurable

larm

configurable
to “Enabled”.
ave any activity, the system will awaken. You can select the
end/power-on activity by configuring these fields. Devices include:
d
In situations where the system en
required to pre th
Options: Delay 4 Sec, Instant-Off (default).
Wake Up Control
e Up If you highlight the “Wak
with the following options:

PCI PME Wake Up

This option will also cause the system to wake up with any onboard LAN activity.
Options: Disabled (default)、Enabled

Ring Wake Up

This option allows you to awaken the system upon receiving an incoming
Options: Disabled (default)、Enabled.

USB KB Wake-up From S3

This item allows you to awaken the system from suspend m
Options: Enabled、Disabled (default)
* This option is configurable only when the ACPI Suspend Type is se

RTC Wake Up

When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens
the system from Suspend mo

Date of Month Ala

You can choose which date of the month the system will boot up. This field is
when “RTC Wake Up” is set to “Enabled”.

Time (hh: mm: ss) A

You can choose the hour, minute and second the system will boot up. This field is only
when “RTC Wake Up” is set

Reload Global Timer Events

When a system goes into suspend mode, certain devices must be inactive for a period of time.
Conversely, if any of those devices h
devices that will participate in susp
Primary IDE 0/ Primary IDE 1/ Secondary IDE 0/ Secondary IDE 1/ FDD,COM,LPT Port/ PCI PIRQ
[A-D]#. Options: Disabled (default), Enable