Intel SRCSASPH16I manual Installation

Installation

1.Power off the computer and all drives, enclosures, and system components. Remove the power cord from the computer.

2.Remove the chassis cover and access the PCI Express add-in card slots. See your server chassis documentation for instructions.

3.Align the controller’s connector with a x8 or x16 PCI Express* slot on the server board.

4.Press down gently but firmly to ensure that the card is properly seated in the slot, as shown in Figure 1. Secure the bracket to the computer chassis.

Bracket Screw

Press

Here

Press

Here

Edge of

Main Board

AF002644

Figure 1. Inserting the Intel® RAID Controller SRCSASPH16I into a

PCI Express* Slot

5. Connect the provided internal cables into the adapter using the 4-port combined end. Make sure the controller and cables are properly attached.

Intel® RAID Controller SRCSASPH16I Hardware Guide 8