Intel® Solid-State Drive 530 Series (2.5-inch)
October 2013 Product Specification
Order Number: 329212-003US 19
ID Attribute Status Flags Threshold
SP EC ER PE OC PW
AAh Available Reserved Space 1 1 0 0 1 1 10
ABh
Program Fail Count
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
1 1 0 0 1 0 0 (none)
ACh
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
1 1 0 0 1 0 0 (none)
AEh
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
1 1 0 0 1 0 0 (none)
B7h
SATA Downshift Count
The count of the number of times SATA
interface selected lower signaling rate due
to error.
1 1 0 0 1 0 0 (none)
B8h
End-to-End Error Detection Count
Reports number of errors encountered
during end-to-end error detection within the
SSD data path.
1 1 0 0 1 1 90
BBh
Uncorrectable Error Count
The raw value shows the count of errors that
could not be recovered using Error
Correction Code (ECC).
1 1 0 0 1 0 0 (none)
BEh
Temperature
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB.
The normalized value reports the current
temperature value. The raw value shows current,
lifetime highest and lifetime lowest
temperatures. Byte 1:0 = current temp Celsius;
Byte 3:2 = lifetime highest temp Celsius; Byte
5:4 = lifetime lowest temp Celsius.
1 1 0 0 1 0 0 (none)
C0h
Power-Off Retract Count (Unsafe Shutdown
Count)
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device. An
unsafe shutdown occurs whenever the device is
powered off without STANDBY IMMEDIATE being
the last command.
1 1 0 0 1 0 0 (none)
C7h
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors. 1 1 0 0 1 0 0 (none)