Intel SSDSC2BW120A401, SSDSC2BW180A4, SSDSC2BW180A401, SSDSC2BW180A4K5, SSDSC2BW240A4, SSDSC2BW240A401, SSDSC2BW240A4K5, SSDSC2BW480A401, SSDSCKGW180A401

Intel® Solid-State Drive 530 Series (2.5-inch)

October 2013 Product Specification

Order Number: 329212-003US 23

5.11 Native Command Queuing

• READ FPDMA QUEUED

• WRITE FPDMA QUEUED

5.12 Software Settings Preservation

The Intel SSD 530 Series supports the SET FEATURES parameter to enable/disable the preservation of

software settings.

5.13 SATA Link Power Management (LPM)

The Intel SSD 530 Series supports the SET FEATURES parameter to enable Device Initiated Power

Management (DIPM). The SSD also supports Host Initiated Power Management (HIPM).

Contents

Main Intel Solid-State Drive 530 Series (2.5-inch) Ordering Information Contents Revision History 1 Introduction 1.1 Terminology Table 1: Terminology 1.2 Reference Documents Table 2: Standard References 2 Product Specifications Specification 2.1 Capacity 2.2 Performance Table 4: Compressible Performance 2.3 Electrical Characteristics Table 7: Operating Voltage and Power Consumption 2.4 Environmental Conditions 2.4.1 Temperature, Shock, Vibration Table 8: Temperature, Shock, Vibration 2.4.2 Altitude 2.5 Product Regulatory Compliance CA/CSA-CEI/IEC CISPR 22-10 (Ref. CISPR 22:2008). 2.6 Reliability 2.7 Hot Plug Support 3 Mechanical Information 4 Pin and Signal Descriptions 4.1 Pin Locations 4.2 Signal Descriptions 4.2.1 Connector Pin Signal Definitions 4.3 Device Sleep Feature 5 Supported Command Sets 5.1 ATA General Feature Command Set 5.2 Power Management 5.3 Security Mode Feature Set 5.4 SMART Command Set 5.4.1 SMART Attributes Page Page Table 14: SMART Attribute Status Flags 5.4.2 SMART Logs 5.5 Device Statistics 5.6 SMART Command Transport 5.7 Data Set Management Command Set 5.8 Host Protected Area Command Set 5.9 48-Bit Address Command Set 5.10 General Purpose Log Command Set Page 6 Certifications and Declarations 7 Appendix

Intel - page 23