Intel X101 user manual Jumpers, Connectors, Headers and Indicators, JP1 BIOS Config, JP2 FWH Lock

2-5 Jumpers, Connectors, Headers and Indicators

Inside the case of any computer there are several cables and jumpers that have to be connected. These cables and jumpers are usually connected one-by-one to connectors located on the board. During the installation you have to pay attention to the orientation of the connectors, headers and the cables. Always locate the position of the first pin on the connector.

Jumpers

JP1: BIOS Config.

1-2: Normal (Default)

2-3: Config. (Safe Speed)

OPEN: Recover

JP2: FWH Lock

1-2: Lock (Default)

2-3: Unlock

Connectors / Headers

1.J30: 1X6 Power Connector

2.J18: +12V Power Connector

3.J22: DIMM socket 1

4.J23: DIMM socket 2

5.J19: AGP (1.5V) connector

6.J20: Front USB header

7.J28: Primary IDE connector

8.J25: Secondary IDE connector

9.J16: PCI connector 1

10.J15: PCI connector 2

11.J14: PCI connector 3

12.J31: Floppy drive connector

13.J35: Chassis FAN

14.J4: PS2 Keyboard and Mouse

15.J21: CPU FAN

16.J17: SYSTEM FAN

17.J2: COM 1

18.J1: VGA Connector

19.J5: Printer Port

20.J29: ATX power connector

21.J34: WOR header

22.J28: Chassis Intrusion header.

23.J13: WOL header

24.J27: Front Panel header

25.J33: SCSI LED input header

26.J6-1: Line-out (Bottom Side)

27.J6-2: Line-in or SURR R-L out (Middle)

28.J11: AUX LINE-IN header

29.J7: USB/LAN connector

30.J9: Reserved (SPDIF)

31.J8: Front Side Audio Header

9