Intellinet Network Solutions 503839 Device Selection, List View, Priority Mapping, Default CAP

Device Selection

From the drop-down list, select the device you want to configure.

List View

The QoS tab includes two list views to provide simple channel access priority (CAP) classification for individual MAC addresses and IP ports. There is a collective limit of eight across both lists. NOTE: No delimiters, colons or dashes are allowed in the MAC address format.

Priority Mapping

The Priority Mapping group contains both VLAN and ToS bit-mapping capability. When selected, packets matching the VLAN or ToS Bit priority will be assigned the PowerLine contention priority (Channel Access Priority, CAP) as set in the corresponding drop-down box. If a packet has both VLAN and ToS in it, VLAN will override ToS.

Default CAP

The Default CAP group allows for default priority mapping of packets that do not have a VLAN or ToS bit. Settings are available for Unicast (directed to a host).

•IGMP (default CAP 3): sets the channel access priority for IGMP frames (the group management frames, not the stream data).

•IGMP Managed Multicast Stream (default CAP 2): sets the default channel access priority for stream data belonging to a snooped IGMP multicast group.