Intellinet Network Solutions 525336 user manual AP Statistics

Parameter	Description
Beacon Interval	This specifies the duration between beacon packets
	(milliseconds). The range for the beacon period is 20-1000
	milliseconds, with a typical value of 100.
DTIM Period	This determines the interval the access point will send its
	broadcast traffic. Default value is 3 beacons.
Preamble	The preamble defines the length of the CRC block for
	communication among the wireless stations. There are two
	modes: Long and Short. High network traffic areas should use the
	shorter preamble type.
Set Defaults	Click to return all settings to default values.
Apply	Confirm the settings on the “Advanced“ screen.

3.8.3AP Statistics

You can get real-time information about the packet transmission and receiving status during wireless communication from this screen. To recount the statistics value, click “Reset.“

3.8.4ICS

To connect to the Internet through this SoftAP, you need to make a bridge between SoftAP and your Internet connection. Select the Internet connection in your SoftAP host machine and click “Apply.”

22