10
10
ADVANCED SETUP
The standard installation of GUESTGATE is based on the assumption that a
DHCP server is present in your network. If this is not the case, you can still
configure GUESTGATE manually. To do this, you need to turn GUESTGATE
on while it is disconnected from the network. If no DHCP server can be
found after three minutes, GUESTGATE will fall back to its default IP address:
192.168.2.1.
Advanced setup requires:
• A network adapter correctly installed in your computer;
• User rights that allow manual configuration of TCP/IP-related settings on your
PC; and
• GUESTGATE connected via an RJ-45 cable to the network adapter in your
PC.
Changing the IP Address of Your PC
1. Click on “Start” —> “Settings” —> “Control Panel.”
2. Double-click the “Network Connections” icon.
INSTALLATION