INSTALLATION
MOUNTING:
1.After reading precaution, decide where you are going to install the unit. Also, see Fig.1.
2.Once the location has been determined, place the amplifier into position. Using a felt tip pen or pencil mark the four holes to be drilled for mounting. NEVER use the amplifier as a template for drilling. It is very easy to damage the amplifier surface in this manner.
3.Remove amplifier. Drill four 3.5 m/m holes into mounting surface. If you want to mount the amplifier to MDF or wood panel, drill four 3.0m/m diameter holes into mounting surface.
4.If possible, test the system to ensure it is operating correctly before final mounting of the amplifier.
5.Mount the amplifier using the supplied 4 self tapping screws.
INSTALLATION DIAGRAM
Self Tapping Screws
FIG.1
3
