Connectors, LED, and Button Table
Part | Description |
10BaseT connector | Connects the EasyLAN 10i2 |
| adapter to a 10 Mbps Ethernet |
| network via a 10BaseT cable. |
|
|
External power supply | Connects the external EasyLAN |
connector (external | 10i2 adapter to a power source via |
adapter only) | a power supply. |
Parallel port connector | Provides the external EasyLAN |
(external adapter only) | 10i2 adapter with a single |
| |
| connect directly, without the need |
| of cabling, to an Intermec printer |
| with a parallel port installed. |
|
|
LED | The LED provides information |
| on |
| network activity. |
Test button | Use the Test button to: |
| • Print a test label that shows |
| some of the EasyLAN 10i2 |
| adapter’s settings. Printers that |
| do not use the Intermec |
| Printer Language (IPL) or |
| Direct Protocol (DP), such as |
| the EasyCoder 91, 7422, C4, |
| or PC4 or the ColorCoder V4, |
| cannot print a test label. |
| • Reset the EasyLAN 10i2 |
| adapter’s settings to the factory |
| default settings. |
| For more help, see “Printing a |
| Test Label” on page 10. |
|
|
EasyLAN 10i2 Ethernet Adapter Quick Start Guide | 7 |