Voice messaging
When used behind a PABX, this telephone will respond to voice messaging systems on many PABX types, giving a visual signal of a message waiting. Your telephone manager will be aware of which system is relevant to your organisation and will adjust or advise you on the adjustment of your telephone accordingly.
This adjustment is carried out by means of a switch, labelled S1 / S2 / N, located next to the recall switch, mentioned above. As supplied, the switch is set to the N ( normal ) position. Under no circumstances should the switch be set to S1 or S2 without the approval of your telecoms manager. In either of the S positions, the telephone must NOT be connected directly to a public network line.
( Technical note : S1 and S2 are for reverse polarity messaging systems. With such a system in use, if the telephone does not respond in the S1 position, switch it to the S2 position and it should then respond.
Some switches require a certain level of software and / or hardware within the switch. If your telephone appears not to work, make sure that you have the correct software / hareware installed ).
6.Maintenance and Problem Solving
Your telephone is a precision electronic instrument. Avoid rough handling and extreme temperatures.
Use a mild detergent and a damp cloth when cleaning. Never use a stronger cleaner.
If your telephone does not appear to be working correctly, please check the following :
No Dialling tone - Is phone cord properly connected to the wall socket?
Will not dial | - Pulse / Tone switch may be set to wrong position. |
9
