MAINTENANCE

(58) MODEL 604 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/19/2007

58

FILTER CARTRIDGE CLEANING OR REPLACEMENT

It is recommended that the filter cartridge be replaced at least every 2 weeks.

1.Make sure filter pump is not operating. Disconnect line cord.

2.To prevent water from escaping the pool, unscrew the strainer grids from the strainer connectors and insert the hat-like plugs into the strainer connectors.

3.In a counter-clockwise motion, remove threaded cover (3) and cover seal (4). Be careful not to lose the cover seal (4).

4.Remove filter cartridge (5) to clean it. The filter may be cleaned from the spray from a water hose.

5.Use judgement as to whether cartridge needs to be replaced.

6.Return cartridge to filtering position.

7.Return the seal (4) and threaded cover (3) to their original positions. Tighten the threaded cover (3) by hand only, twisting it in a clock-wise direction.

8.After service, open the air release valve, remove the plugs, allow any air to escape through the valve before tightening the valve again and replace the strainer grids. The pump is now primed with water again and may be turned on.

SAVE THESE INSTRUCTIONS

Page 9