For example, to set the media type and speed to FAST Twisted Pair, enter the command:

>>>set ewa0_mode FAST

If you will be remote booting via the Ethernet, you must also set the boot protocol to match that of the boot node. Typically OpenVMS uses MOP protocol and UNIX uses BOOTP.

For example to set a port to MOP (VMS) use:

>>>set ewa0_protocol MOP

Note: Port 0 will be the lowest controller letter found by the SRM console, “A” if there are no other Ethernet ports in the system. If there is an onboard Ethernet controller, it will be assigned port letter “A” and the ports on your ITI-5232 will be assigned “B,C,D and E” for ports “0,1,2 and 3” respectively.

29