Invacare 1055947 instruction sheet Safety Summary, Description of Kit, Assembling the Camlock

Models: 1055948

1 2
Download 2 pages 25.52 Kb
Page 1
Image 1
Quad Cane Camlock Replacement Kit

Quad Cane Camlock Replacement Kit

Assembly, Installation and Operating Instructions

Model Nos. 1055948

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Carrier/Dealer for further instructions.

Safety Summary

To ensure the safe and proper installation of the Quad Cane Camlock, these instructions Must be followed:

WARNING

DO NOT use this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Camlock MUST be properly engaged (locked) during use.

Double-button MUST be fully engaged and protruding through height adjustment hole on cane handle to ensure a positive lock.

ALWAYS test to see that the cane handle is properly and securely locked in place before using. This will ensure that camlock is secure.

Quad Canes are designed to provide ambulatory assistance to an individual weigh- ing up to 250 lbs. (113.6 kg.). The replacement camlock does not in any way change the weight limitation of your quad cane.

Description of Kit

ITEM

DESCRIPTION

QTY

1048085

Cam Lever

1

 

 

 

1048086

Cam Housing

1

 

 

 

Assembling the Camlock

NOTE: For this procedure, refer to Detail “A” of FIGURE 1 on page 2.

1.Soak camlock housing in warm water for approximately 10 minutes. NOTE: Soaking will allow the housing to soften adequately to aid in installation.

2.Remove housing from water.

3.Insert cam lever into camlock housing, handle first, through cutout in camlock housing.

4.Rotate cam lever 90° until the rear (round) portion of the cam lever is positioned into the recess of the cam housing with large tab on rear of cam lever facing down.

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Part No 1055947

1

Quad Cane Camlock Replacement Kit

Page 1
Image 1
Invacare 1055947 instruction sheet Safety Summary, Description of Kit, Assembling the Camlock, Save These Instructions