TELESCOPING I.V. ROD KIT
Assembly, Installation and Operating Instructions
Kit No. 1110154
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Carrier/ Dealer for further instruction.
SAFETY SUMMARY
To ensure the safe installation and adjustment of the Telescoping I.V. Rod Kit, these instructions MUST be followed:
GENERAL WARNINGS
DO NOT install or use this equipment without first reading and understand- ing this instruction sheet. If you are unable to understand the Warnings, Cautions or Instructions, contact a healthcare professional, dealer or techni- cal personnel before attempting to install this equipment – otherwise, injury or damage may occur.
DO NOT pull/push the wheelchair by the I.V. rod assembly. Injury to the assistant/occupant and/or damage to the I.V. rod assembly may occur.
DO NOT place any objects on the I.V. rod assembly other than those deter- mined by a healthcare professional.
INSTALLATION WARNING
After any adjustments, repair or service and BEFORE use, make sure all attaching hardware is securely tightened – otherwise injury or damage may result.
This kit contains the following items:
DESCRIPTION | QUANTITY |
|
|
Telescoping Tube | 1 |
Short Hex Screw | 1 |
Small Locknut | 1 |
Long Hex Screw | 1 |
Large Locknut | 1 |
Adjustment Knob | 1 |
Support Bracket | 1 |
Washer | 1 |
|
|
NOTE: The I.V. Rod can be installed to either the right or left side of the wheelchair. The right side installation is shown in all figures. The left side installs in a similar manner.
1
