Invacare 1200, 1300, 1500, 1600 manual Transferring into/out of the Lift, Using the Stretcher

OPERATING THE BATH LIFT

Transferring into/out of the Lift

Using the Stretcher

NOTE: For this procedure, refer to FIGURE 2.2.

NOTE: To transfer out of the lift, reverse this procedure.

1.Position the lift next to the bed with the stretcher parallel to the bed.

2.If necessary, unfold the stretcher by performing the following steps (Detail “A”):

A.Press and hold the button on the stretcher frame.

Stretcher

Resident

B.Lower the wing arm down to the desired position.

C.Repeat steps A and B for the opposite wing arm.

3.Lower the stretcher to the bed height. Refer to Raising/Lowering the Bath Lift on page 13.

LiftBed

DETAIL “A”

Stretcher

Wing Frame

Arm

Button

4.Roll the resident to the side away from the stretcher.

5.Push the lift toward the resident.

6.Lock the casters. Refer to Locking and Unlocking the Casters on page 10.

7.Roll the resident onto the stretcher.

NOTE: Stretcher cover not shown for clarity.

FIGURE 2.2 Transferring into/out of the

Lift - Using the Stretcher

8. Install the side guard and straps (not shown).

NOTE: The resident position can be adjusted by raising or lowering the stretcher ends.

Using the Seat

NOTE: For this procedure, refer to FIGURE 2.3 on page 12.

NOTE: To transfer out of the lift, reverse this procedure.

1.Position the lift next to the seated resident.

2.Lower the seat to the resident’s seat height. Refer to Raising/Lowering the Bath Lift on page 13.

3.Lock the casters. Refer to Locking and Unlocking the Casters on page 10.

4.Swing one or both armrests out of the way.

Part No. 1150696 11 Traverse Lift/Transporter