Invacare 2GRTM, 2GTRTM, 2GTTM manual #2 Back Cushion Assembly 16 Wide 19 Wide

A.B.S. Curved Back w/o Attaching Hardware

Tilt Only (2GT) (After 10/31/00)

NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number.

NOTE: After 10/31/00 spacing between the seat pan and the lower side of the back pan was decreased 3"

by adding 3" to the back pan material. Overall back height did not change.

NOTE: A.B.S. curved backs do not retrofit to the 7/8" round canes. Key slotted back canes and back

attaching hardware must be ordered.

NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.

This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.

#2 Back Cushion Assembly 16" Wide - 19" Wide

Overall	Material	16" W	17" W	18" W	19" W
Back	Back
Height	Height
20"	16"	1097403	1097404	1097405	1097406
21"	17"	1097410	1097411	1097412	1097413
22"	18"	1097417	1097418	1097419	1097420
23"	19"	1097424	1097425	1097426	1097427
24"	20"	1097431	1097432	1097433	1097434
25"	21"	1097438	1097439	1097440	1097441
Back cover and foam are sold as a back cushion		assembly only.

Form No. 99-150

58

To order call toll free 1-800-333-6900, or www.invacare.com