Invacare 2GTTM, 2GTRTM, 2GRTM manual S. Curved Back w/o Attaching Hardware

A.B.S. Curved Back w/o Attaching Hardware

Tilt Only (2GT) (Before 11/1/00)

NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 6-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number.

NOTE: A.B.S. curved backs do not retrofit to the 7/8" round canes. Key slotted back canes and back

attaching hardware must be ordered.

NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.

This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.

Form No. 99-150

45

To order call toll free 1-800-333-6900, or www.invacare.com