![](/images/new-backgrounds/1099330/9933041x1.webp)
SECTION 2—PARTS AND INSTALLATION
9.Check for leaks in supply or drain lines and check operation of tub. Refer to Operating Instructions on page 22.
NOTE: Check local codes regarding maximum water temperature allowed at hot water outlets for facility type.
DETAIL “A” - | In House Water Service | |
PLUMBING | HOT | COLD |
SCHEMATIC | Optional |
|
| Pressure |
|
| Regulator | RADA Mixing Valve |
|
| |
| Tub Fill Valve | Shower Control |
Tub Spout | Valve | |
|
|
(Nearest |
Tub) |
Disinfectant | Back |
| Backflow |
Injector |
| ||
| Preventor | ||
| Flow | ||
|
| ||
|
|
| |
|
| Selector | Burp |
|
| Valve | |
|
| Fitting | |
|
|
|
Flowmeter | Check |
|
|
| Check |
| |
| Valve |
| |
|
| Valve | Pump |
|
|
|
Invacare
Disinfectant
Suction Return Line |
FIGURE 2.5 Plumbing Installation
Post Installation Checklist
Before putting the tub into service, check the following:
❑Water lines have been purged of any foreign matter.
❑Both hot and cold water lines are properly connected to tub.
❑Dedicated 115V 15AMP AC power line is properly wired to unit.
❑Power line is protected by a 15AMP GFCI.
❑All water lines are checked for leaks.
❑ICCG skin care and cleaning products have been ordered. To place your order, call 800‐668‐2337.
❑ICCG representative has been called at 800‐668‐2337 to arrange for an In‐Service on tub.
Part No 1118387 | 21 | Side Entry Whirlpool Tub |