Part No 1078995 3Absolute™ Cushion
FIGURE 1 Attaching the Cushion to the Seating Surface
Use of the Absolute Cushion
If the user finds the cushion uncomfortable or finds it difficult to maintain a stable
position, the following checks should be made:
1. If the user weighs more than 250 lbs. (113.4 kg), verify that he or she is not
compressing the foam such that it is not providing support and pressure relief.
2. Verify that the cushion is oriented properly. The back of the molded foam is
marked with the word,ʺBACKʺ. When the cover is properly installed, the
zipper will be at the back.
3. If the cushion is old, it may not be capable of providing support and should be
replaced.
Cover

CAUTION

The cover is designed to protect the foam against a user’s incontinence and
to provide fire retardency so the cushion must not be used without its cover.
If the cover is torn, it must be replaced.
Cleaning

CAUTION

Machine wash cold. Gentle cycle. Mild detergent. NO fabric softeners or
bleach. Tumble dry low or air dry.
Zipper Faces Rearward
Loop Portion of
Fastening Strap
(Attached to Cushion)
Double Sided Hook
Portion of Fastening Strap Seating Surface
Front of Cushion Lines
Up With the Front of
the Seating Surface
Cushion