SAFETY INSPECTION/MAINTENANCESECTION 2
SAFETY INSPECTION CHECKLIST (CONTINUED)
ITEM |
| INSPECT/ADJUST | ||
| INITIALLY WEEKLY MONTHLY PERIODICALLY | |||
|
|
|
|
|
TIRES (SECTION 7) |
|
|
|
|
Inspect for flat spots and wear. | X | X |
|
|
CAUTION: As with any vehicle, the |
|
|
|
|
wheels and tires should be checked |
|
|
|
|
periodically for cracks and wear, and |
|
|
|
|
should be replaced. |
|
|
|
|
|
|
|
|
|
CASTER ASSEMBLIES (SECTION 7) |
|
|
|
|
Bolts are tight. | X |
| X |
|
Ensure all fasteners are secure. | X |
| X |
|
Inspect caster assembly for proper tension by |
|
|
|
|
spinning caster assembly; caster assembly |
|
|
|
|
should come to a gradual stop. | X |
| X |
|
CAUTION: As with any vehicle, the |
|
|
|
|
wheels and tires should be checked |
|
|
|
|
periodically for cracks and wear, and |
|
|
|
|
should be replaced. |
|
|
|
|
|
|
|
|
|
CLEANING |
|
|
|
|
Clean upholstery and armrests. | X |
|
|
|
Clean molded body shrouds. |
|
| X |
|
|
|
|
|
|
MAINTENANCE
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise, injury or damage may occur.
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame.
When storing scooter for prolonged periods of time, remove batteries. Refer to REPLACING THE BATTERIES in SECTION 8 of this manual. After reinstallation, always recharge batteries before use. Refer to CHARGING THE BATTERIES in SECTION 8 of this manual.
Use care in storage. DO NOT allow any metallic objects to contact the exposed terminals.
SUGGESTED MAINTENANCE PROCEDURES
1.Before using the powered scooter, make sure all nuts and bolts are tight. Check any parts for damage or wear and replace. Check all parts for proper adjustment.
2.Ensure that batteries are properly maintained and charged as required (SECTION 8).
3.Inspect brake for proper operation (SECTION 3).
INSPECTION/ SAFETY MAINTENANCE
Part No. 1118395 | 17 | ® |
|
|