SECTION 2—INITIAL SETUP
Part No 1100873 12 HomeFill™II Compressor
SECTION 2—INITIAL SETUP
NOTE: Dealers Only - Refer to Dealer Information on page6 before
performing this procedure.
Initial Set Up of Compressor

Compressor Initial Setup Checklist

Before operating the HomeFill II Compressor for the first
time, complete the following checklist:
❑Choose a location for the compressor.
❑Transport the compressor to the desired location.
❑Connect the power cord to the compressor.
❑Connect the compressor to the concentrator.

Choosing a location

The compressor should be at least three inches away from
walls, draperies or furniture to ensure sufficient air flow.
Avoid placing the compressor next to heaters, radiators or hot
air registers.
DO NOT use in a closet.
The compressor should sit on a hard flat stable surface, such
as a table or the Ready Rack.
WARNING
NEVER use near any type of flame or flammable/explosive
substances, vapors or atmosphere.