Invacare Compressor - page 24

SECTION 4—COMPRESSOR OPERATION

Part No 1100873 24 HomeFill™II Compressor

CAUTION

DO NOT connect the outlet (cannula) connection to the

HomeFill II compressor, otherwise the conserving

cylinder will not work properly.

4. Momentarily push DOWN on the outer ring (sleeve) of the

connector fillport until GREEN dots are visible to reset the

connector (FIGURE 4.1).

NOTE: If the outer ring (sleeve) is in the UP position (GREEN dots not visible), the connector fillport will not be able to accept the cylinder fillport. Pushing DOWN momentarily will reset the connector fillport (GREEN dots visible) to accept the cylinder fillport.

FIGURE 4.1 Resetting Connector Fillport

5. Grasp the cylinder/regulator assembly in the area behind

the cylinder gauge (FIGURE 4.2).

6. Position the cylinder in the compressor cradle (FIGURE

4.2).

7. Align the cylinder fillport with the connector fillport

(FIGURE 4.2).

Connector Fillport

Outer Ring (Sleeve)

PUSH

DOWN

GREEN Dots BEFORE

COUPLING

CYLINDER

PUSH DOWN

ON SLEEVE

UNTIL

GREEN DOTS

ARE VISIBLE

Contents

Main NOTICE TABLE OF CONTENTS SPECIAL NOTES ACCESSORIES TYPICAL PRODUCT PARAMETERS TYPICAL PRODUCT PARAMETERS - COMPRESSOR LABEL LOCATION DEALER INFORMATION HOMEFILL II INFORMATION NOTICE SECTION 1IMPORTANT SAFETY INSTRUCTIONS Page Page Servicing of Double-Insulated Products SAVE THESE INSTRUCTIONS SECTION 2INITIAL SETUP Initial Set Up of Compressor Compressor Initial Setup Checklist Choosing a location Transporting the Compressor Installing the Power Cord Connecting the Compressor to the Concentrator Page Page SECTION 3CHECKLIST AND CYLINDER INSPECTION HomeFillII Compressor 17 Part No 1100873 FIGURE 3.1 Cylinder Prefill Inspection The Hydrostatic Testing Date External Examination Page REGISTER YOUR PRODUCT! PRODUCT REGISTRATION FORM Register ONLINE at www.invacare.com - or - Complete form and mail. TO FIND MORE INFORMATION ABOUT OUR PRODUCTS, VISIT WWW.INVACARE.COM Page SECTION 4COMPRESSOR OPERATION Connecting/Disconnecting the Cylinder to/from the Compressor Connecting the Cylinder to the Compressor Page Page Page Disconnecting the Cylinder from the Compressor Page Turning the Compressor On Page Setting the Flow Knob to the Prescribed Setting SECTION 5INDICATOR LIGHTS SECTION 5INDICATOR LIGHTS INDICATOR LIGHT COLOR COMPRESSOR STATUS EFFECT SECTION 5INDICATOR LIGHTS INDICATOR LIGHT COLOR COMPRESSOR STATUS EFFECT SECTION 6TROUBLESHOOTING/ CYLINDER FILL TIMES SECTION 6TROUBLESHOOTING/ CYLINDER FILL TIMES TROUBLESHOOTING PROBLEM SOLUTION SECTION 6TROUBLESHOOTING/ CYLINDER FILL TIMES TROUBLESHOOTING PROBLEM SOLUTION Page SECTION 7MAINTENANCE Cleaning the Compressor Filter LIMITED WARRANTY Cabinet LIMITED WARRANTY