Invacare CTMT-F, CTMT-FJ, CTMT-FL Adjusting the Angle of the Manual Center Mount Footrest, Adjusting the Footplate Angle

Part No 1145733 9Formula™ CG Tilt Manual Center Mount Front Rigging
Adjusting the Angle of the Manual Center Mount
Footrest
 WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:Forthisprocedure,refertoFIGURE 5onpage 7andFIGURE 7.
1. Engagethereleaseleverwithonehand
(notshown)andmovethecenter
mountfootresttothedesiredangle
withtheotherhand.
NOTE:RefertoFIGURE 5��forthelocationof
thereleaselever.
2. Disengagethereleaselever(notshown)
tolockthecentermountfootrestinthe
newposition. FIGURE 7 Adjusting the Angle of the
Manual Center Mount Footrest
Adjusting the Footplate Angle
NOTE:Forthisprocedure,refertoFIGURE 8.
1. Flipfootplateup.
2. Screwtheadjustmentscrewinoroutuntilthedesiredangleisachieved.
3. RepeatSTEPS1and2fortheotherfootplate.
FIGURE 8 Adjusting the Footplate Angle
Footplate
Center Mount
Footrest
Manual Center
Mount Footrest
Footplate
(shown away from Extension Tube)
Adjustment
Screw