Invacare 1143214 Installing/Using the Epoxy Bed Rails, Installing 6801A and 6808A Bed Rails

ENTRAPMENT WARNING (CONTINUED)

Refer to the owner’s manuals for beds for additional product and safety information.

Mattress MUST fit bed frame and bed rails snugly to reduce the risk of entrapment.

After any adjustments, repair or bed service and before use, make sure all attaching hardware is tightened securely. Rails with dimensions different from the original equipment supplied or specified by the bed manufacturer may not be interchange- able and may result in entrapment or other injury.

Installing/Using the Epoxy Bed Rails

NOTE: For this procedure, refer to FIGURE 1.

Installing 6801A and 6808A Bed Rails

1.Position the pivot brackets on the bed frame as shown in Details “A” and “B” of FIGURE 1.

2.Loosely attach the pivot brackets to the bed frame with the hex bolts and locknuts.

NOTE: DO NOT tighten the hex bolts and locknuts at this time.

3. Slide the mounting pins of the bed rails through the pivot tubes.

NOTE: Make sure the release lever on the bed rail is pointing towards the foot end of the bed.

Bed Rail (on the outside

of bed frame)

Release Lever

See Detail A

See Detail B Bed Frame

DETAIL “A” - HEAD END TOP VIEW

Mounting Pin

Socket Screw	Crossmember
	Pivot
	Bracket
Inside of	Hex Bolt
	and Locknut
Bed Frame
	Pivot
	Tube

Bed Rail (on the outside of bed frame)

DETAIL “B” - FOOT END TOP VIEW

Hex Bolt and Locknut Pivot Bracket

Mounting Pin

Socket Screw

Inside of

Bed Frame

Pivot Tube

Bed Rail (on the outside of

bed frame)

FIGURE 1 Installing 6801A and 6808A Bed Rails

ICCG Bed Rails 2 Part No 1143214