SECTION
SECTION 2—OPERATING INSTRUCTIONS
WARNING
DO NOT operate unit without filter.
Avoid operating this product in a dusty environment. Otherwise, premature compressor wear could occur.
NOTE: Clean and disinfect the nebulizer and mouthpiece before using the device for the first time. Refer to Cleaning and Disinfecting on page 20.
Setup
NOTE: For this procedure, refer to FIGURE 2.1 on page 17.
1.Place the unit on a table or other flat, stable surface. Be sure you can easily reach the controls when you are seated.
CAUTION
Make sure the power switch is in the off “O” position.
2. Gently twist the nebulizer to separate it into two sections.
