Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678
Setting up
Follow these steps to set up your Synergy 3200 SMS ready for use
Plan the location | Note |
|
Position your Synergy 3200 SMS within 2 metres of a power socket and phone socket otherwise extension cables will be required.
Make sure it is at least 1 metre away from other electrical products to avoid interference.
Do not place your Synergy 3200 SMS product in the bathroom or other humid areas.
1Connect the power supply to the base
Plug the power adaptor into the mains power socket and switch on. The green Power/In Use light comes on.
The base station must be plugged into the mains power socket at all times.
2Install the batteries
2 x NiMH AAA rechargeable batteries are supplied.
Install the batteries as shown.
Slide the battery compartment cover into place (the battery cover may be found in the packaging with the batteries).
3Charge the handset batteries for at least 16 hours
Before you use your Synergy 3200 SMS for the first time, it is important to have the handset batteries fully charged. The batteries need to charge continuously for at least 16 hours to reach full charge.
SETTING UP
11
