Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678
GENERAL INFORMATION
To automatically insert an access code followed by a pause
With some switchboards it may be necessary to insert a pause after entering the switchboard access code, e.g. 9, 11 etc to enable you to get an outside line.
If you use your Synergy 3200 SMS with two separate switchboards, you can set two separate access codes. Then you can simply select which switchboard you are using your phone with.
This feature can also automatically insert a pause between the access code and the phone number stored in the Phonebook.
You can then select which switchboard you want your Synergy 3200 SMS to work with.
u | Press the button to enter the | |
en | ||
M |
| |
| menu. | |
Redial | Use the DOWN button to scroll | |
Vol | ||
to Setup. | ||
Calls | ||
u |
| |
en |
| |
M | Press the button. | |
| ||
Redial | Use the DOWN button to scroll | |
Vol | ||
to PABX Setup. | ||
Calls | ||
u |
| |
en | Press the button. | |
M | ||
| ||
Redial | Use the DOWN button to scroll | |
Vol | to Pabx 1. | |
Calls | ||
u |
| |
en | Press the button. | |
M | ||
| ||
| Display shows PIN Code? |
enu M
enu M
Redial
Vol
Calls
enu M
Redial
Vol
Calls
enu M
Secrecy
Enter the PIN (original code 0000).
Press the button.
Display shows PABX Setup.
Enter the switchboard access code you want.
Press the button to confirm.
You can now also choose the length of the pause to be inserted
– 3 or 5 seconds.
Use the DOWN button to scroll to Pause Setup.
Press the button.
Use the UP or DOWN button to select 3 or 5 seconds.
Press the button to confirm. You hear a confirmation tone.
Press and hold the ✘ button to return to standby.
42
