Technical information, Switchboard compatibility | BT 3200 SMS

Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678

Technical information

How many telephones can you have?

All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line. Your Synergy 3200 SMS has a REN of 1. A total REN of 4 is allowed, if the total REN of 4 is exceeded, the telephones may not ring.

With different telephone types there is no guarantee of ringing, even when the REN is less than 4.

Only use approved power supply, item code 872260.

Only use approved AAA NiMH rechargeable batteries.

Switchboard compatibility

This product is intended for use within the UK for connection to the public telephone network and compatible switchboards, which support tone dialling and timed break recall. If in doubt please consult your service provider.

Switchboard external line access code

You may need to enter an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code.

Recall

To use the recall button

R	I	This is used when connected to
	nt
		certain switchboards and for
		some BT Select Services or
		those services available via your
		network provider.

To set the dialling mode

Your Synergy 3200 SMS is set to tone dialling. If required, you can switch to pulse dialling.

	u		Press the button to enter the
	en
	M
			menu.
	Redial		Use the DOWN button to
	Vol
			scroll to Setup and press the
	Calls
	u
	en		button.
	M

	Redial		Use the DOWN button to scroll
	Vol
			to Dialling Mode and press
	Calls
	u		the button.
	en
	M

	Redial		Use the UP or DOWN button to
	Vol
			select either Tone or Pulse.
	Calls
	u		Press the button. You will
	en
	M
			hear a confirmation beep.
		cy	Press and hold the ✘ button to
	Secre
			return to standby.

GENERAL INFORMATION

41

Image 43

BT 3200 SMS manual Technical information, Switchboard compatibility, Switchboard external line access code, Recall

Contents

BT Synergy 3200 SMS Page Handset At a glance 29 Jun 1025 Base Quick Guide Information for the handset settings Menu Structure DD/MM HH/MM Menu Structure This guide Using the telephone Dect Introduction For your records Unpacking your Synergy 3200 SMSOne telephone line cord One belt clip Environmental Safety informationCleaning General Connect the power supply to the base Setting upInstall the batteries Use it Battery low warning Fit the belt clip onto the back of the handset if required Connect the telephone line cord to the base station Making and receiving calls Using the telephone Redial HandsfreeYou reach Handset Menu Add Entry SecrecyName and number Phonebook Reach Ed. Phonebook Phonebook To enter a pause in a stored numberHold the UP button until a To dial a number from Phonebook To delete a Phonebook name and number To edit Phonebook names and numbersReach Ed. Phonebook Reach Edit Entry Baby call Paging handsetsBabycall Monitor mode Room monitor modeOff Time and date Handset settings Press the UP button to select To Keypad Lock and press button Select On To Handset Menu and press Key Press, Low Battery orOut of Range Name already set To name a handsetUse the Down button to scroll Scroll to Handset Name To adjust the base ringer volume Base settings Show NEW Code? Scroll to Setup and pressUse the Down button to Scroll to PIN Code and press Then Synergy Scroll to Default and pressDefault settings are Earpiece volume Display will flash Base 1 0800 800 Caller Display and Call WaitingCaller Display Caller information not available Calls list To delete is displayed, press When the number you wantCall Waiting To delete Press the UP or Down button To register a handset to the baseAt the base At the handset Shows Confirm? Handset is registeredTo de-register a handset from the base Handset Number Setting 0000 and pressTo register a handset to a different make of base station To see the base station identity Until Internal Call is Internal callsTransferring calls To make an internal call to another handset Press the button Three-way conversationDuring a call with an external Caller Ring Priority and press To switch ring priority setting on/offSelect On or Off Replacing the handset batteries Help No display appears Telephone problems Possible cause Solution Solution Telephone problems Possible cause General information Guarantee Recall Switchboard compatibilitySwitchboard external line access code Technical information Display shows PIN Code? To SetupTo Pabx Setup To Pabx Index REN Ringer Equivalence Number TTE Offices worldwide