2.2General Warnings
WARNING
DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS OR INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE, INJURY OR DAMAGE MAY OCCUR.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
INSTALLATION WARNING
After any adjustments, repair or service and before use, make sure that all attaching component parts are secure.
WARNING
Skin condition should be checked very frequently after the installation of any new cushion.
Your therapist and physician should be consulted if you have any questions regarding weight relief,
Make sure the hook and loop fastening straps are securely attached between the seating surface and cushion before using.
3 Usage
3.1Attaching/Removing the Cushion To/From the Seating Surface
WARNING
Make sure the hook and loop fasteners are securely attached to the seating surface and to the cushion BEFORE using. If the cushion is not secured to the seating surface, use caution when transferring in and out of the wheelchair.
To remove the cushion from the seating surface, reverse the following procedure.
The cushion attaches to the seating surface using the hook and loop fasteners on the bottom of the cover. The seating surface can be seat upholstery, drop base or seat pan.
The zipper on the cushion MUST ALWAYS face rearward.
Part No 1167615 | 3 | Invacare® Matrx® Stabilite™Cushion |
