Invacare MA50, MA51, MA55 manual

Owner’s Operator and Maintenance Manual

DEALER: This manual MUST be given to

the user of the product.

USER: BEFORE using this product, read this

manual and save for future reference.

For more information regarding

Invacare products , parts, and services,

please visit www.invacare.com

MA50 Series

MA50 Alternating Pressure

Overlay System

MA51 Alternating Pressure

Mattress System

MA55 Alternating Pressure

Low Air Loss Mattress System

Contents

Main MA50 Series WARNING ACCESSORY WARNING SPECIAL NOTES NOTICE Page TABLE OF CONTENTS REGISTER YOUR PRODUCT Register ONLINE at warranty.invacare.com TYPICAL PRODUCT PARAMETERS TYPICAL PRODUCT PARAMETERS Electrical Parameters Mechanical Parameters Performance Parameters MA50/MA51/MA55 Environmental Parameters MA50/MA51/MA55 LABEL LOCATION SECTION 1GENERAL GUIDELINES Contraindications Installation Entrapment May Occur Fire Hazard DANGER Smoking Anesthesia Equipment Oxygen Electrical SECTION 2OPERATION Installing the Mattress Overlay System (MA50) Mattress Replacement System (MA51 and MA55) Installing the Side Rails Installing the Power Unit Connecting the Hose Connecting the Power Cord SECTION 2OPERATION Using the Front Panel NOTE: For this procedure, refer to FIGURE2.5. FIGURE 2.5 Using the Front Panel Power Button Static/Alternating Pressure Button Firm/Soft Buttons Fowler Button Max Inflate Button Mode Button (Max Inflate/Low Air Loss) Lock Button Alarm Silence Button Power Fail LED Low Pressure LED Powering Up the System Placing the Patient on the Mattress Transferring Patient From/To a Gurney Transferring Patient From/To a Wheelchair Preparing for CPR Procedure About Power Outage and Transportation SECTION 3MAINTENANCE AND TROUBLESHOOTING Cleaning the System Storing the System SECTION 3MAINTENANCE AND TROUBLESHOOTING Troubleshooting PROBLEM CAUSE SOLUTION LIMITED WARRANTY