Invacare ® Spree XT Wheelchair
Specifications
Seat width | 10 - 18" |
|
Seat depth | 12 - 20" |
|
Overall chair width open | Seat width plus 7.5" (12, | Seat width plus 8.75" (22, |
Overall chair depth | min. 29.5" (without |
|
Overall chair height range | 36.5" - 44" |
|
Back angle adjustment | 86˚ to 106˚ |
|
Tubing outside diameter | 1" |
|
Tilt range | 0˚ - 45˚ |
|
Weight of chair | 29 lb.* |
|
Weight capacity | 150 lb. |
|
Warranty | Limited lifetime on frames and crossbraces |
|
*16" x 16" Spree XT with AT902 casters, 12" composite wheels with 12" pneumatic tires, 90˚ swingaway front rigging, AT5543 adjustable angle flip up footplates,
|
|
|
|
| |||
| Rear wheel size | 3" caster | 4" caster | 5" caster | 6" caster | 6" x 2" caster | |
12" | 16", 16.5", | 15.5", 16", | 16", 16.5", | 17", 17.5" | 17.5" | ||
|
|
| 17" | 16.5", 17" | 17", 17.5" |
|
|
20" | – | – | 17.5" | 17.5", 18", | 17.5", 19" | ||
|
|
|
|
|
| 18.5" |
|
22" | 16.5", 17" | 16.5", 17" | 16.5", 17", | 17", 17.5", | 17.5" | ||
|
|
|
|
| 17.5" | 18" |
|
24" | – | – | 17.5" | 17.5", 18", | 17.5", 19" | ||
|
|
|
|
|
| 18.5" |
|
|
|
|
|
|
| ||
| Front rigging type | Min | Max |
|
|
| |
|
| 60˚ | 13.5" | 17.5" |
|
|
|
|
| 60˚ MFX | 9" | 12.5" |
|
|
|
|
| 70˚ | 13.5" | 16.5" |
|
|
|
|
| 70˚ tapered | 12.75" | 16.25" |
|
|
|
|
| 70˚ MFX | 5.75" | 11.75" |
|
|
|
|
| 90˚ | 4.5" | 7.5" |
|
|
|
|
| Elevating | 14" | 20" |
|
|
|
*Footplate height adjusts in 1" increments. Measurement taken from top of seat rail to back of footrests.
Arm heights* |
| |
| Cantilever |
|
| 6" - 9" | |
| Locking | 9" - 12" |
|
| |
| Low Range | 8" - 12" |
| High Range | 10" - 16" |
*All measurements taken from the top of seat rail to top of armrest pad.
ANSI/RESNA W/C19 sec 6.2 Presale Literature Notification
A. Minimum turning radius 23.06".
Minimum
B. Spree XT wheelchairs 17"D or deeper may be longer than 1220 mm exceeding the ADA definition of a common wheelchair and the minimum length requirement of lifts on public vehicles, and may therefore present particular difficulties accessing some vehicles.
C. Total wheelchair mass = 30.25 lb (13.75 kg) - including front rigging,
D. Average lateral dummy displacement = approximately .8125" (21.5 mm)
E.Overall score = 17 Overall rating = A
Measures how well a wheelchair can accommodate a
F.i. The Spree XT tested was sized to accommodate a 170 lb. test dummy. 16"W x 18"D, 60˚ front rigging, 12" composite wheels, 12" pneumatic flat free tires, Invacare® KSS seating system, 8" composite/pneumatic flat free casters)
ii.The Spree XT tested was tied down using four
iii.The Spree XT tested was sized to accommodate a 170 lb. test dummy. 16"W x 18"D, 60˚ front rigging, 12" composite wheels, 12" pneumatic flat free tires, Invacare KSS seating system, 8" composite/pneumatic
iv.The Spree XT tested used a wheelchair anchored pelvic belt and vehicle anchored shoulder belt for testing.
v.The Spree XT tested complies with the performance requirements of ANSI/RESNA
G.For all types of vehicles, the Spree XT requires four SAE
H.When the TRRO or TRBKTS option is selected, the Spree XT provides a location for anchoring of an
I.The wheelchair anchored pelvic belt is supplied by Invacare.
Invacare Corporation
www.invacare.com
USA
One Invacare Way Elyria, Ohio
(800)
Canada
570 Matheson Blvd. E. Unit 8 Mississauga, Ontario L4Z 4G4 Canada (800)
Invacare, Yes, you can. and the Blue Medallion Design are registered trademarks and Quick Set is a trademark of Invacare Corporation. Specifications are subject to change without notification. Accessories and seating products shown in the photographs are not necessarily included
in the base price
of wheelchair. Refer
to current price list located at www.invacare.com
© 2006
Invacare Corporation
Form No.
‘‘Invacare says ‘ Yes, you can,®’ and
I couldn’t have said it better myself.’’