Invacare TDXSP, TDXSR, TDXSC ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification - TDX SC

Models: TDXSR

1 26
Download 26 pages 19.53 Kb
Page 25
Image 25
ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification – TDX SC

ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification – TDX SC

A.Minimum turning radius 20.1" with (2) U1 batteries. Minimum turn-around width 31" with (2) U1 batteries.

B.The TDX SC wheelchair with (2) 22NF batteries has a maximum length of 35.25" (895 mm) and the TDX SP wheelchair with (2) Group 24 batteries has a maximum length of 35.63" (905 mm), meeting the ADA definition of a common wheelchair and the maximum length requirements of lifts on public vehicles.

C.Total wheelchair mass for TDX SC with (2) U1 batteries = 235 lb. (106.8.3 kg) Adult.

D.Average lateral dummy displacement for TDX SC with (2) U1 batteries = approximately .47" (11.9 mm) Adult.

E.Overall Score for TDX SC Adult with (2) U1 batteries = 18, Overall Rating = A

F.i. The TDX SC tested was sized to accommodate a 168 lb. test dummy (17" x 17" x 22" high and 10" Center-Wheel Drive tires.)

ii.The TDX SC was tied down using four tie-down brackets –

2 brackets located on the front of the base frame and 2 brackets located on the rear of the base frame.

iii.The TDX SC was tested with a 168 lb. test dummy.

iv.The TDX SC tested used a wheelchair-anchored pelvic belt and vehicle-anchored shoulder belt.

v.The TDX SC tested complies with the performance requirements of ANSI/RESNA W/C 19 sec. 5.3.

G.For all types of vehicles, the TDX SC requires four SAE J2249- compliant tie-down strap assemblies for effective securement.

H.The TDX SC provides a location for anchoring of an Invacare- provided pelvic belt. This belt has been tested in accordance with ANSI/RESNA W/C 19.

I.The wheelchair-anchored pelvic belt is supplied by Invacare.

ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification – TDX SPREE

A.Minimum turning radius 18.9" with (2) U1 batteries. Minimum turn-around width 29" with (2) U1 batteries.

B.The TDX SPREE wheelchair with (2) U1 batteries has a maximum length of 39" (991 mm) and the maximum length requirements of lifts on public vehicles.

C.Total wheelchair mass for TDX SPREE with (2) U1 batteries = 237 lb. (108 kg).

D.Average lateral dummy displacement for TDX SPREE with (2) U1 batteries = approximately .53" (13.4 mm).

E.Overall Score for TDX SPREE with (2) U1 batteries = 19, Overall Rating = A Overall

F.i. The TDX SPREE tested was sized to accommodate a 130 lb. test dummy (16" x 16" x 22" high and 10" Center-Wheel Drive tires.)

ii.The TDX SPREE was tied down using four tie-down brackets –

2 brackets located on the front of the base frame and 2 brackets located on the rear of the base frame.

iii.The TDX SPREE was tested with a 130 lb. test dummy.

iv.The TDX SPREE tested used a wheelchair-anchored pelvic belt and vehicle-anchored shoulder belt.

v.The TDX SPREE tested complies with the performance require- ments of ANSI/RESNA W/C 19 sec. 5.3.

G.For all types of vehicles, the TDX SPREE requires four SAE J2249- compliant tie-down strap assemblies for effective securement.

H.The TDX SPREE provides a location for anchoring of an Invacare- provided pelvic belt. This belt has been tested in accordance with ANSI/RESNA W/C 19.

I.The wheelchair-anchored pelvic belt is supplied by Invacare.

25

Page 25
Image 25
Invacare TDXSP, TDXSR, TDXSC manual ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification - TDX SC