Backrest folding at |
| |
� | ||
- Comprises of two tubes with handles either |
| |
straight or bent at 10° and upholstery in which |
| |
tension cannot be adjusted. Folding enables one | � | |
to reduce the height of the backrest for easier | ||
| ||
transport. This folding operation can be carried out |
| |
by the wheelchair user. |
|
-Use : In order to fold the backrest, pull both lever A and fold down the backrest using the handles. To put the backrest back in
operation, checking carefully that lever A are in place and that there is no play in the backrest.
Warning : | 3 |
-Do not place your fingers between the joint of the folding backrest.
-Check that the backrest is fixed correctly before leaning back or pushing the wheelchair.
-It is not recommended that you lean on the backrest when the backrest is folded
Reclining backrest (Photo 4)
A ratchet angle adjustable from 0° to 90° backrest
- Adjustment : To adjust the angle of the backrest | 4 |
lift up the recliner handles A, adjust the backrest |
|
to the required angle, then, release the recliner |
|
handles assuring that the system is securely fixed |
|
and that both backrest posts are at the same |
|
angle. |
|
Warning :
-We recommend that you use anti tippers or the amputee rear wheel position to increase the stability of the chair.
-Check carefully that the backrest is fixed correctly before leaning back or pushing the chair.
-Do not put your hands near the ratchet system when adjusting the backrest.
-We recommend that you should always keep your hands on the armrests when the backrest angle is being adjusted.
�
�
18
