Invacare Variance Plus manual Rear anti tippers Photo, Belts, Belt with Hook and Eye Photo

-Use : The hub brakes can be used to slow down the chair by using the handle A and can be locked by using the ratchet B.

-Adjustment : Turn screw C to increase or decrease the braking force.

8.12 Rear anti tippers (Photo 26)

The anti-tip castors are intented to keep you from tipping backwards.

Tipping may result from an inapropriate position of the rear wheels, faultly operation of the wheelchair by the user or a third party.

-Use : Anti-tip castors are fixed into the back down tube of frame.

��

��

�

�

Anti tippers can be removed. Press the pin-spring

A and slide the anti tipper out. Reverse the operation in order to put it back in position. The pin should be in the out position in the hole of the frame.

-Adjustment : Adjustment is used to obtain the distance between the ground and the castors. The anti tip castors must be adjusted the same way on both sides. This adjustment must be done by a suitably

qualified person.27

8.13 Belts

Belt with Hook and Eye (Photo 27)

-Use : Belts position depends on your handicap, and must be determined by the qualified health advisor.

-Adjustment : Put the end back of strap in position on the Hook and Eye Fastener.

Warning : Do not allows the belt to get caught in
	��	�	�
any of the wheels.
Buckle security belt (Photo 28)
- Use : Belt position depends on your handicap,	�		�
and must be determined by the qualified health

25