Invacare operating instructions Installing the Ventilator Tray Onto the Chair Frame

Upper Brace

Ventilator Tray

Lower

5/16-24x1-1/2-inchBrace

Hex Head Screw

(STEP 4)

Rear

Chair Frame

Tube Clamp (STEP 1)

Self Locking

Nut (STEP 6)

Middle Brace

Middle Mounting

Hole (STEP 3)

Mounting Hole

(STEP 3)

Tube Clamp (STEP 1)

Front

Self Locking Nut

(STEP 4)

Ventilator Brace

(STEP 5)

Clamp Saddle

(STEP 5)

Ventilator Tray Hanger Bracket (STEP 5)

NOTE: The ventilator tray hanger bracket and the venti- lator brace are shown unattached for clarity.

Mounting Holes	1/4-20x1-1/2-inch Button
(STEP 5)	Head Screws (STEP 6)

FIGURE 4 - INSTALLING THE VENTILATOR TRAY ONTO THE CHAIR FRAME

Installing The Ventilator Arms Onto The Ventilator Tray/Chair Frame (FIGURE 5)

1.Position one (1) ventilator tray arm on the UPPER brace of the chair frame by firmly grasping the tube clamp on the top of the ventilator tray arm and bend- ing it around the UPPER brace of the chair frame.

2.Secure the tube clamp on the ventilator tray arm to the UPPER brace of the chair frame using one (1) 5/16 - 24 x 1-1/2-inch hex cap screw and self locking nut. Hand tighten ONLY.

3.Position the LOWER end of the ventilator tray arm UNDER the ventilator tray, making sure the two (2) mounting holes in the LOWER end of the ventilator tray arm align with the two (2) mounting holes in the REAR of the ventilator tray.

4.Secure the ventilator tray arm to the ventilator tray using two (2) 1/4 - 20 x 1/2-inch button head screws and self locking nuts. Hand tighten ONLY.

5.Repeat STEPS 1 - 4 for the other vent tray arm.

6.Securely tighten ALL attaching hardware on the ventilaor tray.

Chair Frame

5/16-24x1-1/2-inch Button

Head Screws

Tube Clamp

Upper Brace

Ventilator Tray Arms

Self

Locking

Nut

Rear

1/4-20x1/2-inch

Button Head

Screws

Mounting Holes

Self
Locking Nuts	Ventilator Tray

FIGURE 5 - INSTALLING THE VENTILATOR ARMS ONTO THE VENTILATOR TRAY/CHAIR FRAME

3