USING THE VENTILATOR TRAY (FIGURE 6)
NOTE: The ventilator tray straps are positioned on the ventilator tray BEFORE the ventilator tray is shipped.
1.Position all six (6) strap slides on the outside of the ventilator tray.
2.Position the ventilator battery in the front portion of the ventilator tray.
3.Secure the two (2) straps around the top of the ven- tilator battery and clip together.
4.Position the ventilator in the rear portion of the venti- lator tray.
5.Secure the four (4) straps around the top of the ven- tilator and clip together.
6.Adjust the slides, located in the middle of each strap, up or down to increase or decrease length. See DE- TAIL “J”.
7.Securely tighten the straps around the battery and ventilator by pulling the ends of the straps through the rear portion of each buckle DETAIL “K”.
DETAIL “J” |
| DETAIL “K” |
Strap |
| Strap |
|
| Rear |
Slide | Portion | |
| of Buckle | |
See Detail “J” | See Detail “K” | |
Rear Portion |
| |
|
| |
of Ventilator |
|
|
Tray |
| Ventilator |
|
| |
Buckle |
| Battery |
Slide
Ventilator
Tray
Front Portion
of Ventilator
Tray
FIGURE 6 - USING THE VENTILATOR TRAY
Invacare Corporation | www.invacare.com |
|
|
|
|
One InvacareWay | Technical Support | Invacare and “Yes, you can” are trademarks of Invacare |
Elyria, Ohio USA | Corporation. | |
| © 2000 Invacare Corporation | |
| Form No. |
