Walking Tutor

Assembly, Installation and Operating Instructions

Model No. WT 200

SAVE THESE INSTRUCTIONS

NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.

Safety Summary

To ensure the safe and proper installation of the WT200 walking tutor, these instructions MUST be followed:

WARNING

DO NOT use this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Assembling the Walking Tutor

Tools required:

9/16 Open End Wrench

16mm Box End Wrench

19mm Box End Wrench

13mm Socket Wrench

16mm Socket Wrench

18mm Socket Wrench

5mm Allen Key

6mm Allen Key

Attaching Strap Assemblies to the Boom

NOTE: For this procedure, refer to FIGURE 1 on page 2.

1.Remove the boom cover to expose the boom crossbar (Detail “C”).

2.Secure the strap assembly on the crossbar by placing the strap around crossbar and inserting the buckles through the loop (Detail “A”).

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Part No 1141439

1

Walking Tutor

Page 1
Image 1
Invacare WT 200 instruction sheet Safety Summary, Assembling the Walking Tutor, Attaching Strap Assemblies to the Boom