Operating the Car Kit with Two Bluetooth enabled phones

Activate multi-point connection

1.The default setting of Car Kit’s multi-point connection is off. To turn this on, power on the Car Kit and make sure it is in standby mode. Then press and hold “+” button for 3 seconds until hearing a beeping sound.

2.To turn off this feature, under standby mode, press and hold “-“ for 3 seconds until hearing a beeping sound and the Car Kit will power off automatically. When power on the Car Kit again, it will only connect to the last connected Bluetooth enabled cellular phone.

Note: When the multi-point feature is in use, the Car Kit does not support three-way calling feature.

18

Page 18
Image 18
IOGear GBHFK231 manual Operating the Car Kit with Two Bluetooth enabled phones, Activate multi-point connection