Restore to Default Settings

1.When the Car Kit is on and in standby mode, press and hold both “+” and “-“ buttons for 10 seconds until the BLUE and RED LED flash 5 times. Then the

Car Kit will enter pairing mode automatically after the reset.

2.When the Car Kit is not powered on, turn on the Car Kit and press and hold both “+” and “-“ buttons for 10 seconds until the BLUE and RED LED flash

5 times. Then the Car Kit will resume standby mode automatically after the reset.

28

Page 28
Image 28
IOGear GBHFK231 manual Restore to Default Settings