If the upgrade failed to complete successfully a
dialog box appears asking if you want to retry. Click
Yes to retry. If you click No, the
Upgrade Failed
screen appears:
Click Cancel to close the Firmware Upgrade Utility.
See the next section,
Firmware Upgrade Recovery
,
for how to proceed.
Firmware Upgrade Recovery
There are basically three conditions that call for
firmware upgrade recovery:
• When you begin a firmware upgrade, but
decide not to proceed with it.
• When the Mainboard firmware upgrade fails.
• When the I/O firmware upgrade fails.
To perform a firmware upgrade recovery, do the
following:
Slide the
Firmware Upgrade Recovery Switch
(see p. 8 drawing) to the Recover position.
Power off and restart the switch.
Slide the
Firmware Upgrade Recovery Switch
back to the Normal position.
Repeat Step 2.
1.
2.
3.
4.
The Firmware Upgrade Utility
36