Powerline Configuration Utility

3.The Main tab shows all the other HomePlug units on your powerline network. It will represent them by MAC Address, and will also show the available bandwidth to each unit (Units farther away from the current computer might have a lower Data Rate, since the distance is farther). If you add or subtract units from your home network, you might want to re-Scan, by clicking the “Scan” button. This will rescan the network, and refresh with any changes.

Note: Only units with the same Network Password will be shown, please check that fi rst, to make sure they all have the same network password (Case sensitive).

21

Page 20
Image 20
IOGear GHPB42 user manual Powerline Configuration Utility