COMPONENT OUTPUT

SD INTERLACE

SD PROGRESSIVE

720P

Note

When connecting to a TV equipped with Y/Cb/Cr video input.

When connecting to a TV equipped with Y/Pb/Pr video input. Enabling this option will make VIDEO OUTPUT options disabled.

When connecting to a TV supports high definition video input, enabling this option will output a 16:9 up-scaling component video format for High Definition displays. Enabling this option will make TV STANDARD / TV DISPLAY / VIDEO OUTPUT options disabled, and the DVD/JPEG ZOOM function will also be disabled at this mode.

You’ll have to exit the SETUP MENU for these settings to take place.

By holding and then pressing MENU button on the remote control, or pressing

the button on the keypad, the video output format can be switched in the following sequence: 720p SD PROGRESSIVESD INTERLACENTSC / PAL (toggle) and so on. If you find the display incorrect, try this method to get back to standard NTSC or PAL video output, and then configure the video setup correct.

After Exiting the settings, choose the movie folder that you want by using the up and down arrows on your remote. Press Play to View.

27

Page 27
Image 27
IOGear GMD2025U120 manual Component Output, SD Interlace