IOGear GPSR01U Installation, Select Next in the following window to initiate the Setup Wizard

Installation

3.Select Next in the following window to initiate the Setup Wizard.

4.The Wizard will search for the print server on your network. If the print server does not show up, click the [Refresh] button.

Note: If you’re Print Server does not show up after clicking the Refresh button, you may need to change the SSID of the Print Server to match the SSID of your network. To change the SSID on the Print Server, please see the section labeled “Changing the SSID on your Print Server.on” Page 41.

11